Try using "Template" action and construct your text with hyerlinks than paste it to page.
Other option is to create simple LOCAL html page somewhere on your hard disk with
desired text and links, than open that local html page in another tab in BAS and than copy
from that tab to the tab where you are working.
Возможно ли использовать ВПН в скрипте?
-
-
-
Запустил впн-приложение в смd, получил вот такой лист... может посоветуйте что делать для смены ip??
has been verified.--management-client-pf : management interface clients must specify a packet
filter file for each connecting client.
--plugin m [str]: Load plug-in module m passing str as an argument
to its initialization function.Multi-Client Server options (when --mode server is used):
--server network netmask : Helper option to easily configure server mode.
--server-ipv6 network/bits : Configure IPv6 server mode.
--server-bridge [IP netmask pool-start-IP pool-end-IP] : Helper option to
easily configure ethernet bridging server mode.
--push "option" : Push a config file option back to the peer for remote
execution. Peer must specify --pull in its config file.
--push-reset : Don't inherit global push list for specific
client instance.
--ifconfig-pool start-IP end-IP [netmask] : Set aside a pool of subnets
to be dynamically allocated to connecting clients.
--ifconfig-pool-linear : Use individual addresses rather than /30 subnets
in tun mode. Not compatible with Windows clients.
--ifconfig-pool-persist file [seconds] : Persist/unpersist ifconfig-pool
data to file, at seconds intervals (default=600).
If seconds=0, file will be treated as read-only.
--ifconfig-ipv6-pool base-IP/bits : set aside an IPv6 network block
to be dynamically allocated to connecting clients.
--ifconfig-push local remote-netmask : Push an ifconfig option to remote,
overrides --ifconfig-pool dynamic allocation.
Only valid in a client-specific config file.
--ifconfig-ipv6-push local/bits remote : Push an ifconfig-ipv6 option to
remote, overrides --ifconfig-ipv6-pool allocation.
Only valid in a client-specific config file.
--iroute network [netmask] : Route subnet to client.
--iroute-ipv6 network/bits : Route IPv6 subnet to client.
Sets up internal routes only.
Only valid in a client-specific config file.
--disable : Client is disabled.
Only valid in a client-specific config file.
--client-cert-not-required : Don't require client certificate, client
will authenticate using username/password.
--username-as-common-name : For auth-user-pass authentication, use
the authenticated username as the common name,
rather than the common name from the client cert.
--auth-user-pass-verify cmd method: Query client for username/password and
run command cmd to verify. If method='via-env', pass
user/pass via environment, if method='via-file', pass
user/pass via temporary file.
--opt-verify : Clients that connect with options that are incompatible
with those of the server will be disconnected.
--auth-user-pass-optional : Allow connections by clients that don't
specify a username/password.
--no-name-remapping : Allow Common Name and X509 Subject to include
any printable character.
--client-to-client : Internally route client-to-client traffic.
--duplicate-cn : Allow multiple clients with the same common name to
concurrently connect.
--client-connect cmd : Run command cmd on client connection.
--client-disconnect cmd : Run command cmd on client disconnection.
--client-config-dir dir : Directory for custom client config files.
--ccd-exclusive : Refuse connection unless custom client config is found.
--tmp-dir dir : Temporary directory, used for --client-connect return file and
plugin communication.
--hash-size r v : Set the size of the real address hash table to r and the
virtual address table to v.
--bcast-buffers n : Allocate n broadcast buffers.
--tcp-queue-limit n : Maximum number of queued TCP output packets.
--tcp-nodelay : Macro that sets TCP_NODELAY socket flag on the server
as well as pushes it to connecting clients.
--learn-address cmd : Run command cmd to validate client virtual addresses.
--connect-freq n s : Allow a maximum of n new connections per s seconds.
--max-clients n : Allow a maximum of n simultaneously connected clients.
--max-routes-per-client n : Allow a maximum of n internal routes per client.
--stale-routes-check n [t] : Remove routes with a last activity timestamp
older than n seconds. Run this check every t
seconds (defaults to n).Client options (when connecting to a multi-client server):
--client : Helper option to easily configure client mode.
--auth-user-pass [up] : Authenticate with server using username/password.
up is a file containing the username on the first line,
and a password on the second. If either the password or both
the username and the password are omitted OpenVPN will prompt
for them from console.
--pull : Accept certain config file options from the peer as if they
were part of the local config file. Must be specified
when connecting to a '--mode server' remote host.
--auth-retry t : How to handle auth failures. Set t to
none (default), interact, or nointeract.
--static-challenge t e : Enable static challenge/response protocol using
challenge text t, with e indicating echo flag (0|1)
--server-poll-timeout n : when polling possible remote servers to connect to
in a round-robin fashion, spend no more than n seconds
waiting for a response before trying the next server.
--explicit-exit-notify [n] : On exit/restart, send exit signal to
server/remote. n = # of retries, default=1.Data Channel Encryption Options (must be compatible between peers):
(These options are meaningful for both Static Key & TLS-mode)
--secret f [d] : Enable Static Key encryption mode (non-TLS).
Use shared secret file f, generate with --genkey.
The optional d parameter controls key directionality.
If d is specified, use separate keys for each
direction, set d=0 on one side of the connection,
and d=1 on the other side.
--auth alg : Authenticate packets with HMAC using message
digest algorithm alg (default=SHA1).
(usually adds 16 or 20 bytes per packet)
Set alg=none to disable authentication.
--cipher alg : Encrypt packets with cipher algorithm alg
(default=BF-CBC).
Set alg=none to disable encryption.
--prng alg [nsl] : For PRNG, use digest algorithm alg, and
nonce_secret_len=nsl. Set alg=none to disable PRNG.
--keysize n : Size of cipher key in bits (optional).
If unspecified, defaults to cipher-specific default.
--engine [name] : Enable OpenSSL hardware crypto engine functionality.
--no-replay : Disable replay protection.
--mute-replay-warnings : Silence the output of replay warnings to log file.
--replay-window n [t] : Use a replay protection sliding window of size n
and a time window of t seconds.
Default n=64 t=15
--no-iv : Disable cipher IV -- only allowed with CBC mode ciphers.
--replay-persist file : Persist replay-protection state across sessions
using file.
--test-crypto : Run a self-test of crypto features enabled.
For debugging only.TLS Key Negotiation Options:
(These options are meaningful only for TLS-mode)
--tls-server : Enable TLS and assume server role during TLS handshake.
--tls-client : Enable TLS and assume client role during TLS handshake.
--key-method m : Data channel key exchange method. m should be a method
number, such as 1 (default), 2, etc.
--ca file : Certificate authority file in .pem format containing
root certificate.
--capath dir : A directory of trusted certificates (CAs and CRLs).
--dh file : File containing Diffie Hellman parameters
in .pem format (for --tls-server only).
Use "openssl dhparam -out dh1024.pem 1024" to generate.
--cert file : Local certificate in .pem format -- must be signed
by a Certificate Authority in --ca file.
--extra-certs file : one or more PEM certs that complete the cert chain.
--key file : Local private key in .pem format.
--tls-version-min <version> ['or-highest'] : sets the minimum TLS version we
will accept from the peer. If version is unrecognized and 'or-highest'
is specified, require max TLS version supported by SSL implementation.
--tls-version-max <version> : sets the maximum TLS version we will use.
--pkcs12 file : PKCS#12 file containing local private key, local certificate
and optionally the root CA certificate.
--verify-hash : Specify SHA1 fingerprint for level-1 cert.
--cryptoapicert select-string : Load the certificate and private key from the
Windows Certificate System Store.
--tls-cipher l : A list l of allowable TLS ciphers separated by : (optional).
: Use --show-tls to see a list of supported TLS ciphers.
--tls-timeout n : Packet retransmit timeout on TLS control channel
if no ACK from remote within n seconds (default=2).
--reneg-bytes n : Renegotiate data chan. key after n bytes sent and recvd.
--reneg-pkts n : Renegotiate data chan. key after n packets sent and recvd.
--reneg-sec n : Renegotiate data chan. key after n seconds (default=3600).
--hand-window n : Data channel key exchange must finalize within n seconds
of handshake initiation by any peer (default=60).
--tran-window n : Transition window -- old key can live this many seconds
after new key renegotiation begins (default=3600).
--single-session: Allow only one session (reset state on restart).
--tls-exit : Exit on TLS negotiation failure.
--tls-auth f [d]: Add an additional layer of authentication on top of the TLS
control channel to protect against DoS attacks.
f (required) is a shared-secret passphrase file.
The optional d parameter controls key directionality,
see --secret option for more info.
--askpass [file]: Get PEM password from controlling tty before we daemonize.
--auth-nocache : Don't cache --askpass or --auth-user-pass passwords.
--crl-verify crl ['dir']: Check peer certificate against a CRL.
--tls-verify cmd: Run command cmd to verify the X509 name of a
pending TLS connection that has otherwise passed all other
tests of certification. cmd should return 0 to allow
TLS handshake to proceed, or 1 to fail. (cmd is
executed as 'cmd certificate_depth subject')
--tls-export-cert [directory] : Get peer cert in PEM format and store it
in an openvpn temporary file in [directory]. Peer cert is
stored before tls-verify script execution and deleted after.
--verify-x509-name name: Accept connections only from a host with X509 subject
DN name. The remote host must also pass all other tests
of verification.
--ns-cert-type t: Require that peer certificate was signed with an explicit
nsCertType designation t = 'client' | 'server'.
--x509-track x : Save peer X509 attribute x in environment for use by
plugins and management interface.
--remote-cert-ku v ... : Require that the peer certificate was signed with
explicit key usage, you can specify more than one value.
value should be given in hex format.
--remote-cert-eku oid : Require that the peer certificate was signed with
explicit extended key usage. Extended key usage can be encodedas an object identifier or OpenSSL string representation.--remote-cert-tls t: Require that peer certificate was signed with explicit
key usage and extended key usage based on RFC3280 TLS rules.
t = 'client' | 'server'.PKCS#11 Options:
--pkcs11-providers provider ... : PKCS#11 provider to load.
--pkcs11-protected-authentication [0|1] ... : Use PKCS#11 protected authenticati
on
path. Set for each provider.
--pkcs11-private-mode hex ... : PKCS#11 private key mode mask.
0 : Try to determind automatically (default
).
1 : Use Sign.
2 : Use SignRecover.
4 : Use Decrypt.
8 : Use Unwrap.
--pkcs11-cert-private [0|1] ... : Set if login should be performed before
certificate can be accessed. Set for each prov
ider.
--pkcs11-pin-cache seconds : Number of seconds to cache PIN. The default is
-1
cache until token is removed.
--pkcs11-id-management : Acquire identity from management interface.
--pkcs11-id serialized-id 'id' : Identity to use, get using standalone --show-p
kcs11-idsSSL Library information:
--show-ciphers : Show cipher algorithms to use with --cipher option.
--show-digests : Show message digest algorithms to use with --auth option.
--show-engines : Show hardware crypto accelerator engines (if available).
--show-tls : Show all TLS ciphers (TLS used only as a control channel).Windows Specific:
--win-sys path : Pathname of Windows system directory. Default is the pathnam
e
from SystemRoot environment variable.
--ip-win32 method : When using --ifconfig on Windows, set TAP-Windows adapter
IP address using method = manual, netsh, ipapi,
dynamic, or adaptive (default = adaptive).
Dynamic method allows two optional parameters:
offset: DHCP server address offset (> -256 and < 256).
If 0, use network address, if >0, take nth
address forward from network address, if <0,
take nth address backward from broadcast
address.
Default is 0.
lease-time: Lease time in seconds.
Default is one year.
--route-method : Which method to use for adding routes on Windows?
adaptive (default) -- Try ipapi then fall back to exe.
ipapi -- Use IP helper API.
exe -- Call the route.exe shell command.
--dhcp-option type [parm] : Set extended TAP-Windows properties, must
be used with --ip-win32 dynamic. For options
which allow multiple addresses,
--dhcp-option must be repeated.
DOMAIN name : Set DNS suffix
DNS addr : Set domain name server address(es)
NTP : Set NTP server address(es)
NBDD : Set NBDD server address(es)
WINS addr : Set WINS server address(es)
NBT type : Set NetBIOS over TCP/IP Node type
1: B, 2: P, 4: M, 8: H
NBS id : Set NetBIOS scope ID
DISABLE-NBT : Disable Netbios-over-TCP/IP.
--dhcp-renew : Ask Windows to renew the TAP adapter lease on startup.
--dhcp-pre-release : Ask Windows to release the previous TAP adapter lease on
startup.
--dhcp-release : Ask Windows to release the TAP adapter lease on shutdown.
--register-dns : Run net stop dnscache, net start dnscache, ipconfig /flushdns
and ipconfig /registerdns on connection initiation.
--tap-sleep n : Sleep for n seconds after TAP adapter open before
attempting to set adapter properties.
--pause-exit : When run from a console window, pause before exiting.
--service ex [0|1] : For use when OpenVPN is being instantiated by a
service, and should not be used directly by end-users.
ex is the name of an event object which, when
signaled, will cause OpenVPN to exit. A second
optional parameter controls the initial state of ex.
--show-net-up : Show OpenVPN's view of routing table and net adapter list
after TAP adapter is up and routes have been added.
--block-outside-dns : Block DNS on other network adapters to prevent DNS leaksWindows Standalone Options:
--show-adapters : Show all TAP-Windows adapters.
--show-net : Show OpenVPN's view of routing table and net adapter list.
--show-valid-subnets : Show valid subnets for --dev tun emulation.
--allow-nonadmin [TAP-adapter] : Allow OpenVPN running without admin privileges
to access TAP adapter.Generate a random key (only for non-TLS static key encryption mode):
--genkey : Generate a random key to be used as a shared secret,
for use with the --secret option.
--secret file : Write key to file.PKCS#11 standalone options:
--show-pkcs11-ids [provider] [cert_private] : Show PKCS#11 available ids.
--verb option can be added BEFORE
this.General Standalone Options:
--show-gateway : Show info about default gateway.C:\Program Files (x86)\VPN Monster\OpenVPN>pause
Press any key to continue . . .
